MR-1
Topic | Replies | Views | Activity | |
---|---|---|---|---|
Cutting Parameters - Getting Started Reference Guide
Hi all! Now that we have machines cutting in the field, we wanted to provide customers with a Cutting Parameters Quick Reference Chart to use when programming cuts on MR-1. We believe that this is a really good starting … |
![]() ![]() ![]() ![]() ![]() |
41 | 8121 | July 2, 2023 |
Lets see what's being made on MR-1!
Ok guys with functioning machines. Give those of us still building and waiting on machines something to look at. What are you machining simple or complicated lets see it. |
![]() ![]() ![]() ![]() ![]() |
320 | 27630 | May 28, 2025 |
Having issues with Y-Axis deviation/catch
|
![]() ![]() ![]() ![]() ![]() |
6 | 204 | May 28, 2025 |
ATC/SATC Upgrade
|
![]() ![]() |
1 | 65 | May 25, 2025 |
Chip disposal. Scrap?
|
![]() ![]() ![]() ![]() |
4 | 483 | May 23, 2025 |
Disassemble MR-1 to move into Building then reassembly
|
![]() ![]() |
1 | 72 | May 21, 2025 |
Collant leaking from drain
|
![]() ![]() |
1 | 86 | May 19, 2025 |
Steel alloy 4130 Chromoly …
|
![]() ![]() ![]() |
6 | 105 | May 18, 2025 |
3D Tester Rollout?
|
![]() ![]() ![]() ![]() |
14 | 154 | May 16, 2025 |
Add on USB KEyboard
|
![]() ![]() ![]() |
2 | 88 | May 15, 2025 |
Tram issue with flycutter?
|
![]() ![]() ![]() ![]() |
3 | 98 | May 15, 2025 |
Noise levels of MR-1 with enclosure?
|
![]() ![]() ![]() ![]() ![]() |
14 | 267 | May 12, 2025 |
Coolant pump specs
|
![]() ![]() ![]() |
3 | 87 | May 12, 2025 |
3d printed item Thread
|
![]() ![]() ![]() ![]() ![]() |
45 | 3495 | May 11, 2025 |
MR-1 build with mods
|
![]() ![]() ![]() ![]() ![]() |
70 | 7908 | May 11, 2025 |
Height of Enclosure
|
![]() ![]() |
3 | 66 | May 9, 2025 |
Y rail cover options
|
![]() ![]() ![]() ![]() ![]() |
14 | 1314 | May 6, 2025 |
Any MR-1 machines near cincinnati?
|
![]() ![]() |
1 | 60 | May 3, 2025 |
Wireless jog controller
|
![]() ![]() ![]() ![]() ![]() |
56 | 1556 | May 1, 2025 |
Mr-1 base plate threaded hole locations
|
![]() ![]() ![]() ![]() ![]() |
15 | 198 | April 30, 2025 |
Post processor/etc for ASPIRE 11
|
![]() ![]() ![]() ![]() ![]() |
10 | 431 | April 29, 2025 |
Multiple Work Offset Issue
|
![]() ![]() ![]() |
5 | 244 | April 29, 2025 |
Correct G-code for drilling
|
![]() ![]() ![]() ![]() ![]() |
42 | 3200 | April 28, 2025 |
Error from CutControl
|
![]() ![]() ![]() ![]() |
6 | 472 | April 27, 2025 |
Drilled 90 holes in under 4 minutes with my MR-1
|
![]() ![]() |
3 | 187 | April 26, 2025 |
CutControl manual jog after zero
|
![]() ![]() |
2 | 65 | April 22, 2025 |
Rigid Tapping. What would it take?
|
![]() ![]() ![]() ![]() ![]() |
11 | 1126 | April 19, 2025 |
Slow Spindle Speed
|
![]() ![]() |
1 | 66 | April 18, 2025 |
CutControl updates pop up error "failed to communicate COM4"
|
![]() ![]() ![]() |
3 | 153 | April 14, 2025 |
MR-1 Centroid Acorn Upgrade Thread
|
![]() ![]() ![]() ![]() |
19 | 544 | April 13, 2025 |