Work holding options

Wondering what everybody’s thoughts were on those Amazon low profile vices? Collecting some goodies before I get my table up and running.

Thanks,

Which ones?? I got some of the FoxAlien ones and they were absolute garbage.

I bought two. Used one. It didn’t hold at all, so I junked it. I haven’t touched the second one. Let me know if you wanna try one for yourself and you can have it.

2 Likes

The Fox Alien ones look like clones of the ones that Taig has made for 20+ years.

They don’t really have anything that puts high downward pressure on the moving jaw. A vise without that feature is going be pretty limiting for milling. You can see this on the Langmuir vise with the wedge shape of the jaws:

On the SMW Mod-Vise (what I use) the angle of the flat-head bolts pulls the jaws both forward and down.

On the FoxAlien vise there is nothing to keep the jaw from lifting. Even a small amount of lift will greatly reduce contact area and let the material release.

1 Like

Roger that! Return initiated :rofl:

1 Like