Tampa New User Help

[1952cas]

I’m a new user in the Tampa Bay area looking for a little help mostly on Fusion 360. Any help would be greatly appreciated.

[DonP]

So there is a lot of things to learn in fusion 360. Many struggle for the first month or two but it’s worth it. Are you looking for just a basic 2D user design video or something more specific?

[1952cas]

I’ve watched a bunch of videos I just need some help with the basics.

[DonP]

These are really good videos to watch on fusion basics.

https://www.langmuirsystems.com/software/fusion

[TinWhisperer]

@1952cas Welcome to the forum

[Upstategrowguy77]

As @DonP Has mentioned watch the videos on the Langmuir site and save your self some headaches. I just went through this same issue and I should have watched these videos first before all the YouTube videos because the Langmuir videos are very detailed and walk you through it step by step.

[TinWhisperer]

@1952cas I put a small collection of CAD cam videos for Fusion 360 that are centered in using it for the Langmuir.

Practical Fusion 360 Videos

I have been wanting to produce a series of Fusion 360 videos. Recently I purchased desktop microphone so still getting use to talking while CAD ing. These videos will be short and to the point while working through practical scenarios relevant to using a plasma table. The first project in the series will be: -aAn overview of using Fusion 360 to produce the CAD and CAM for a simple part for the Langmuir Pro. Here is the drawing of the part we will make in this video. [sample plate] Here i…

I also have the same videos plus others in live streams at this YouTube link.

TinWhisperer

But for sure start with the langmuir videos on the main site.

@DonP also has made a set of videos posted here

Fusion 360 helpful videos

I’m going to make a few videos to get this topic rolling. Please feel free to share if you make any videos… Link to vertical numbers on a 4x4 in fusion 360…