Mach3 Pierce Delay Issue

[jamesdhatch]

Mach3 Pierce Delay Issue

A few people have observed that when pierce delay is set to less than 1 second, the actual dwell time in Mach3 is significantly less than 1 second. Anything equal to above 1 second is accurate. Some preliminary research suggests that this a bug within Mach3. Fortunately there is a suitable workaround. In Mach3 open the general config tab and check the box for “G04 Dwell in ms”. This change forces Mach3 to interpret the pierce delay vales in milliseconds instead of seconds. [dwell%20in%20ms] M…