Correct G-code for drilling

[Dre]

Here’s the link to the new topic regarding the SolidworksCAM/Camworks post.

SolidworksCAM Post with Long Code Enabled

Here is a post processor for the SolidworksCAM extension. This is just a generic 3x Fanuc based post with long code enabled for the canned drilling cycles. This was made using the Camworks post development tools. Keep in mind that at the moment I don’t have any way to test and debug this so if you have any errors please include a snippet of the section of the G-code that is giving you the trouble and I can make the necessary changes as they’re reported. After/if Langmuir makes CC recognize can…