Perhaps they could. Me personally, I wouldn’t feel right insisting on them putting their workers at risk for my table. Do I want it? yes. Can I wait, I’ll have to. There has never been anything like this, no point in getting all bent out of shape over it.
3 Likes
I received my razor weld plasma today. Hooked it all up and seems to work nicely. I definitely am anxious to get my table, but willing to wait longer if it means the people that are building them need to stay home for health reasons. I did tell my wife today that if I get sick and die before I get my table I’m gonna be pissed. Lol
2 Likes
I doubt it would be hard for them to keep their workers 6-10 feet apart. I certainly can wait. I don’t want anyone put a risk so I can get my plasma table sooner. People in line at Home Depot or the supermarket today weren’t 6 feet apart today. Evidently the order of the governor does not have criminal penalties like the “shelter in place order” in the SF bay area where I live.
1 Like
#9569 THC shipping confirmation. Where can I find the manifest for the order? (what each box contains?)
Have your forklift ready for the THC (just kidding, very small box) boxes 1 and 3 contain all the tubing and rails and slats in one box and water table, braces in the other. The money box is box #2. It has the electronics, hardware, gantry bearing assemblies and X axis carrier assembly.
langmuir-danielCrossFire PRO
We plan to ship the CrossFire PRO in three boxes. There is a chance that we may try to ship it in two, but most likely it will be three. Below is a summary of each:
Box 1
This box will contain all of the tubes, slats, slat holders, cable support tube, lead screws. etc. It will weigh roughly 140 pounds. Dimensions are roughly 12" x 64" and 4" tall.
Box 2
This box will contain the hardware sub box, electronics box, motor sub box, and Z-Axis sub box. It will weigh roughly 50 pounds. Dimensions TBD.
Box 3
This box will contain the water table half sections and the the table frame gussets. It will weigh roughly 40 pounds and the dimensions are roughly 36" x 26" and 4" tall.
Each add-on option will come in its own separate box. For example, if you ordered a plasma cutter, THC, and laptop stand, then you will receive 6 boxes total.
Let me know if you have any questions!
1 Like
Got mine yesterday. Seems pretty good.
@tjb I just ordered the machine torch for the RazorWeld Cut45. They’re not too bad pricing wise and it uses Hypertherm consumables!
1 Like
If you read the UPS shipping data. It’ll tell you the weight.
130 is the frame
35 is the water table
65 is the box with all the hardware, motors, electronics.
Order #12420 June is so far away, and Covid-19 will more than likely push it out.
Yeah! We also got our Razerweld yesterday ! #11699 and emails that they will begin shipping accessories. Great job LS!
Here’s a picture of the machine torch for the RazorWeld Cut45. It’s a 70A machine torch using Hypertherm consumables. It’s roughly about $400 shipped.
1 Like
The Torch Height Control has arrived!
2 Likes
My THC got here today as well! Getting excited! #9964
Guess I should add that to my order, #12692.
Hopefully before June!
Got razorweld 45 last month, and rec. my HTC yesterday…only a few “minor” pcs needed 
stay away Kung-flu
1 Like
Now’s a good time to setup the VIM wiring to your HT so it’s ready when you get to the THC install step in the machine setup 
The DIV & RAW cable sets are in the box you just got. You’ll use one or the other depending on whether you have a CPC port and machine torch.
1 Like
My 45xp does not have the cpc port (I got a good deal online on this one) ill be running the hand torch for now…Now I get to research whether adding the cpc port upgrade is really needed to run with hand torch or what the best route to go is any advice?