2 weeks, Razorweld cut45 Tech dept tested plasma, still won't fire torch on table, user error at it's finest (SOLVED)

[Covert1]

@mechanic416

You also need at least 65psi flow air to the machine torch or it will not pilot arc.

@mechanic416

Air set to at least 65 to 70 psi with air coming out of the torch.

I misinterpreted your posts as what the pressure needed at the machine was. “air coming out the torch” went right through my head and didn’t jog the idea to be looking at the gauge while it was triggered. Just to verify the pressure was present when connected. I was pretty irritated at the time.