Very new to CNC, Fusion, and Fire Control

[TinWhisperer]

I did a video once about index cutting but I’m having problems finding it.

I’ll see if I can get down to the computer and do something.

In the meanwhile search “work coordinate system” or “WCS” you’ll need to learn about this to perform an index cut.

This is a good write-up about index cutting

Guide to index cutting large patterns...any improvements will be appreciated

I’ve spent the last day documenting and testing procedures that worked for me to cut a pattern in excess of the Crossfire Pro 32x48 limitations. Below is my guide and pictures of the example that I have used. This would al be even easier if FireControl allowed you to move the torch head when the g-code program hits a pause, but I found that I could only do so when the program was stopped. Please post if you have any better suggested ways to do this or any improvements. Indexing Guide for Cros…