I’m going to start a live stream 4:30am pst today
It’ll be a continuation on the post and beam brackets that was working on the prototype it’s done and we’re happy with the way it turned out. So time to make a few different sizes.
Here’s a few pictures of the prototype.
4 Likes
I plan on Starting a live stream at 635 am pst ish.
Its been snowing and I have Christmas markets and fairs on the brain.
I thought about putting together a few Christmas themed projects and posting them to FireShare.
Currently on FireShare there is only 11 items that show up when you search " Christmas"
If everyone posts some Christmas related files to FireShare then we’ll have some good variety!
I’ll start in this live stream and glean a few designs, then up lot them to Fireshare.
*Tis’ the Season…almost
@JDE thanks for fiquring out the large font trick! i promise i will not abuse it…
xmas reindeer LF tin 2022 quarter plate.dxf (30.5 KB)
xmas reindeer lf tin quarter plate v1.f3d (2.3 MB)
Link to Navigable 3D Reindeer Mode l
Xmas ornamnets x6.dxf (378.4 KB)
The Xmas ornament F3D is slightly over the 4MB file limit so can not post it.
https://www.langmuirsystems.com/fireshare/search?q=christmas
download and cut these from Fireshare, Post Picture when you do.
3 Likes
TomWS
November 5, 2022, 6:19pm
38
Cool! Thanks! I imported the DXFs into Lightburn, scaled, rearranged, and now have a good laser cut file ready to go!
2 Likes
Among other things today I cut out the beam brackets.
From this post
The Christmas quarter inch plate deer.
And the set of six ornaments.
From this post.
I plan on Starting a live stream at 635 am pst ish.
Its been snowing and I have Christmas markets and fairs on the brain.
I thought about putting together a few Christmas themed projects and posting them to FireShare.
Currently on FireShare there is only 11 items that show up when you search " Christmas"
[christmas fireshare]
:christmas_tree:If everyone posts some Christmas related files to FireShare then we’ll have some good variety!
I’ll start in this live …
I ended up cutting the reindeer out of quarter inch aluminum I didn’t want to cut it off full sheet of steel and I didn’t have a piece big enough.
Also a warning on the six ornaments the ready to cut files Pierce delay is only .05 second so it’s not going to work.
Here is the final fit up and weld out of those beam brackets.
4 Likes
Starting a second Christmas Projects live stream at 2:20am PST
I will try to add a couple more Christmas related Projects to FireShare
https://www.langmuirsystems.com/fireshare/search?q=christmas
https://www.langmuirsystems.com/fireshare/xmas-2022-tree-2d-plus-forum-example-tinwhisperer
XMAS TREE LF TIN 2DPLUS 2PCS.dxf (333.2 KB)
Click here for viewable 3D model of the christmas tree
Again the F3D is 4.37 mb over the 4mb file size limit so I cant post it.
@langmuirsystems can we up that limit to 6 or 7 mb ?
2 Likes
Knick
November 6, 2022, 11:06am
41
The slots you cut to ease bending would you ever weld those up?
Is that a swag brake? do you like it?
1 Like
No. figured it was strong enough
Yes and yes. For the money it is a handy rig.
2 Likes
keith1
November 6, 2022, 11:40am
43
Daaang TW! I just now stumbled across this. Awesome as always my man!
1 Like
Right on.
I am going to stream again in a few minutes. 400am mst +/-
Can’t sleep may as well stream.
1 Like
Knick
November 6, 2022, 11:45am
45
I have been thinking of building a press brake but have never got around to it. Don’t really need one but want one, just in case.
1 Like
I am going to make a tea and start one more Christmas theme stream session at about 620am mst
Fusion 3D model of the 4 different hangings
xmas 2022 x4 christmas hangings.dxf (3.0 MB)
2 Likes
4AM MST
Another Another Christmas Themed Stream, I will also out into one forum request of hole section.
this ended up long winded so here is a second part.
the 3d model
xmas sled 2022 lf tin 2d plus.dxf (393.7 KB)
https://www.langmuirsystems.com/fireshare/xmas-2022-sled-12pcs-18-lf-tinwhisperer-forum-live-stream-example#comment-2981
Fireshare link
For 1/8 Material
Warning I have not made this yet. I likely will not get a chance till this coming weekend so there maybe some errors.
2 Likes
Upped to 8mb! Thanks @TinWhisperer !
4 Likes
I’m going to start a live stream at 3:30 p.m. mountain standard Time.
My freight didn’t show up so I have some time to use.
I’m going to look at a few Fusion 360 related Forum issues.
And if I get time from there I’m going to continue adding Christmas projects to Fireshare.
These are some of the topics I’ll look at.
I made a small grill cut out for my ranger and made a grid pattern of 1/4 holes. I could/can’t for the life of me figure out an easy way to select all the holes to cut other than just click all 212 holes individually, can someone help me figure out an easier way?
[image]
@Txn
https://forum.langmuirsystems.com/t/re-shop-sign/22427/8
@blueyoda
Take your time, I am never in a hurry unless I say so. On this one I thought I would put it out there for everyone. You are always much faster on my questions then I ever expect!
@Knick
1 Like
I’m going to start another Christmas project live stream session in about 15 or 20 minutes.
345am mst
Also check if there’s any forum issues I can go over in Fusion 360 at the same time.
live stream of these project available for the next 7 days
twitch live stream channel
viewable 3D model
xmas reindeer family 2022 tin forum example.dxf (718.6 KB)
xmas reindeer family 2022 tin forum example v5.f3d (6.1 MB)
https://www.langmuirsystems.com/fireshare/xmas-reindeer-family-2022-tin-forum-example-live-stream#comment-2986
2 Likes
72Pony
November 9, 2022, 4:02pm
54
I was watching your video with my little boy (3) on my lap this morning. When you started talking, he pointed at your avatar and asked what’s that daddy? I said it’s TinWhisperer. He said that’s a scary TinWhisperer daddy…
4 Likes