Torch moves before voltage

[toolboy]

go to this thread…
I made a copper pipe cooler and went from 150 pierces to over 500 in one day

Diy air compressor Aftercooler

Since using my plasma table and having a smaller air compressor, I have been constantly fighting water in my line. So after some research I found that guys are installing after coolers with their air compressors to bring down the temperature as close to ambient as possible, so that then you can catch the moisture in a water trap. Tonight I made my aftercooler setup, and immediately noticed a difference. I ran the compressor for about 15 minutes and got 0 water out my tool. Basically I got a ac …