SOLVED- Torch will not fire (I've read the threads)

Change that plunge rate to around 70ipm. The default rate is way too slow.

2 Likes

Yeah that’s way too slow. Langmuir says to make it at least 50ipm.

1 Like

Got it!! Thanks guys!!!

3 Likes

Ive figured out another issue that needs to be addressed. We pulled the water-pan out to weld the seam this weekend,put it all back in,FireControl keeps faulting due to Pierce-Delay too short,no matter what we did. The issue is the cord connections on the RazorWeld and the cords from the table,they really dont fit well,and a slight wiggle had the table cutting fine again. Also,on the Vim box,those cables dont really seat in well,a positive locking cable would be alot better,or a cam-lock type connector like on the main box on the table uses for THC/IHS cables.