How to connect Powermax 30XP to Crossfire XR

[TinWhisperer]

@carson Welcome to the Forum

@carson

Does anyone have experience using the table with a 30xp?

several topics over the years have covered this

https://forum.langmuirsystems.com/search?q=Powermax%2030x%20order%3Alatest

here is a good one showing the torch wiring.

Hypertherm Powermax 30xp Torch Wiring

There’s not a lot of information available for wiring the Powermax 30xp for CNC. Here’s what worked for me. Tap in to the Orange and Violet wires: [30xp%20Wiring%20(2)] To take for cover off, just remove the 2 screws for the handle, gently spread the front and back covers apart, and then the top cover will pull straight up. Hope this helps!

@carson

It does not have a CPC port,

here is another link with the RAW voltage guide

Hypertherm 30 xp VIM Box RAW Voltage Wiring Quick Guide Pics

Here is a quick guide pics to connect a VIM box ( Raw Voltage ) side to a Hypertherm 30 xp. [Plasma%20Raw%20Negative%20Voltage] [Plasma%20Raw%20Positive%20%20Voltage] [Vim%20Box%20Mount]

@carson

Any help or reassurance with the 30 would be greatly appreciated!

it has worked for many people.

what are you most cutting with your machine? the 30xp is fairly light duty