Yet another dimple die

[72Pony]

@TinWhisperer made a 3d printed one he used to do this on the XR.

@TinWhisperer

I made a swaging die for a 3.5" kitchen sink basket. I wanted some nice big drains that sat well below flush. I installed X4 in my XR and i am sure the die could do many more.

The dies were design in Fusion, exported as a step file to Bambu Studio and Print with 100% infill ABS on a X1C. The backing plates for also design in Fusion and cut on the XR from 1/4 mild steel.