I’m going to start a live stream at 3:30 p.m. mountain standard Time.
My freight didn’t show up so I have some time to use.
I’m going to look at a few Fusion 360 related Forum issues.
And if I get time from there I’m going to continue adding Christmas projects to Fireshare.
These are some of the topics I’ll look at.
I made a small grill cut out for my ranger and made a grid pattern of 1/4 holes. I could/can’t for the life of me figure out an easy way to select all the holes to cut other than just click all 212 holes individually, can someone help me figure out an easier way?
[image]
@Txn
https://forum.langmuirsystems.com/t/re-shop-sign/22427/8
@blueyoda
Take your time, I am never in a hurry unless I say so. On this one I thought I would put it out there for everyone. You are always much faster on my questions then I ever expect!
@Knick
1 Like
I’m going to start another Christmas project live stream session in about 15 or 20 minutes.
345am mst
Also check if there’s any forum issues I can go over in Fusion 360 at the same time.
live stream of these project available for the next 7 days
twitch live stream channel
viewable 3D model
xmas reindeer family 2022 tin forum example.dxf (718.6 KB)
xmas reindeer family 2022 tin forum example v5.f3d (6.1 MB)
https://www.langmuirsystems.com/fireshare/xmas-reindeer-family-2022-tin-forum-example-live-stream#comment-2986
2 Likes
72Pony
November 9, 2022, 4:02pm
54
I was watching your video with my little boy (3) on my lap this morning. When you started talking, he pointed at your avatar and asked what’s that daddy? I said it’s TinWhisperer. He said that’s a scary TinWhisperer daddy…
4 Likes
I plan on starting a live stream at 6:00-6:15 a.m. mountain time today.
I may try to get another Christmas themed project " (remixed) created" and uploaded to fireshare.
I also browse through the Forum and take a look at some Fusion related topics.
I’m taking the day off from my normal toil (Remembrance Day here in Canada) Maybe we’ll look at a remembrance Day related project too.
6:03…I’m waiting for a Windows update to finish…
1 Like
Wsidr1
November 11, 2022, 1:42pm
57
Hey TW, your muted or your mic is not working.
1 Like
thanks @Wsidr1 i figured it out I’ll be back on in 5
1 Like
Live stream from this morning .
Tree design
Sled design
3d model and Fusion file
Twitch Stream
https://www.langmuirsystems.com/fireshare/xmas-2022-sled-remix-18-aluminum-forum-example-tinwhisperer-christmas
Fireshare project Link
Xmas 2022 sled remix forum tin.dxf (868.5 KB)
please upload pictures of you make any of these projects.
2 Likes
Thinking of another design session in 15 to 20 minutes.
12:45-1PM MST estimates start time
One design I want to get ready is a Crow with “Nevermore” written below it for my wife.
2 Likes
Planning another live stream tonight.
8PM mst
Mostly random CAD work,I have nothing in mind in particular.
If you have anything in mind post below.
I do enjoy doing these streams.
Knick
November 12, 2022, 2:31am
62
Don’t forget you were going to do one on 2d settings
I haven’t, like I said I’m doing more research and coming up with a lot of “new” stuff.
But tonight I can run through a simple piece of quarter inch plate.
I have a a few sheets in my truck I have to unload still.
1 Like
Simple Plate Model from the first part of the video
I talked about this topic issue at the one hour mark of the video
https://forum.langmuirsystems.com/t/fusion-360-cutting-offset
The Wasp model from the end of the video
I’ll continue the CAM for the wasp in the future.
Thank you for watching.
4 Likes
Continuing the CAM on the Wasp
6 AM MST
I have not cut this yet but I was thinking 1/4" aluminum would be a good choice.
Fusion 360 Model and Download
Langmuir System’s Forum Topic
Twitch Live Stream available for 7 days. If you want it after that make a request and I can post it to my Youtube Channel
YouTube Channel
https://www.langmuirsystems.com/fireshare/wasp-example-project-from-3axisco-remixed-to-work-better-with-plasma-twitch-stream-quarter-inch-aluminum#comment-2998
FireShare download
wasp dxf tin example.dxf (751.0 KB)
2 Likes
I am going to live stream finishing the cam for this
Edger Allen Poe Raven Themed Hanging for my wife
At around 6:45 AM MST ?
it is a mix of single line and fully shapes.
We will have to generate multiple toolpaths
had to alter the design come more but now ready to cut!
1 Like
yesterday I did some cutting of the projects I’ve been live streaming for the last week.
From today
Live streamed a couple forum topics this morning.
I plan on streaming again this morning in about 20 minutes .
2 Likes
Knick
November 14, 2022, 12:06pm
69
Wow you are a cutting machine!!! Will you sell most of that?
1 Like