Next I used the Straight Cut function to get a rectangular piece of aluminum to size. Bent up on the press brake and drilled holes for mounting.
A little rattle-can paint job and mounted to the table. The computer has a new home.
Here’s the set-up, ready to run.
Oh, after refilling the pan up for the second time it started to leak. In two places. One is at the van stone flange, evidently I monkey fisted tightening it and cracked the plastic threads. Fortunately it’s dripping right over the tote lid, which then drains back into the tote, so not a big deal for now while the replacement flange is on order. The second is a slow-drip from the back of the pan, right at the mating seam. I gooped some more sealant across the whole thing and am crossing my fingers while it cures.
Had to do it all over again I think I would have just done the dimple-die mod with the kitchen drains and tig welded the pan seam. At least I can still (attempt to) weld the pan seam if it continues to leak.