And I wanted to see if I got some test cuts dialed in. I wish steel was free! LOL
Seriously though, after only having the table and torch for a day and a half, I am learning so much. This forum is loaded with great information. I find myself looking stuff up as I’m cutting.
THANK YOU forum members for all the help just in the last few days.
Yeah we have a small farm, 8 acres. down to 3 horses now. probably won’t go up again, used to be 7.
I love this thing. I just have to get the settings dialed in. The only thing I don’t like is the Everlast sits forever on each transition and the pierce seems so long. but if I slow the pierce delay down it misses the beginning of the cut on every piece.
Look at threads on here about changing the pierce delay to miliseconds. Mach 3 has a bug where setting less tha 1 second causes it to ignore the pierce delay. There are a few threads on here about it should be easy to find. Basically you change a setring in mach3 for it to read pierce delay as milliseconds then you set the pierce delay to 1000 for 1 second or 500 for half a second etc and then it works properly