@JoeMX82 I could use the set if you still have it
I’m finished and contacted Emerson Corder who’s next on the list to send to him. If I don’t hear from him in 24 hours, I’ll contact Shawn Smith who would be next on the list.
John here in Nor Cal, I would like to be on the list please
Thanks
Here’s the link to sign up.
I sent it to Emerson back in September. I’m not sure where it is now. You may have to go down the list and contact folks to see who has it now.
1 Like
I also 3D printed the dies and they worked perfectly.
1 Like
How do we know where the die is today?
It’s really unfortunate that people are taking months each to perform this mod and pass the die along. It takes about an hour total to drain the table, clean it out, perform the mod and move on. If you can’t turn this around in two weeks then perhaps you shouldn’t be on the list…
5 Likes
I would like to use the dimpler2 when available. had my table for a bit and it would help drain the water.
Awesome video by the way
Would love to help you but I’m not even sure who has the die by now. There is a signup (Google docs) excel sheet that has been posted and folks put their name on that list and it is supposedly passing from one person to another. On option you might consider is to request from the folks on the forum a 3D printed verision of the die. I provided the drawings and someone converted it to an stl file and folks have been 3D printing it. It seems to work well for a single table. You should be able to search the forum and post your request as forum members have been extremely helpful.
I have the set of Dimple Dies.
Who would like them next?
Sent a message to the next person of the list, - David Setness -
Hope he responds
Did David Setness respond? Looks like he received it on 6/30. I’ve added my name to the list.
i shipped them to him should have gotten on the the 5th of july
eric
1 Like
try carbon fiber reinforced Polycarbonate, the rigidity and strength with that reinforced polymer is amazing (if you are just printing out one set of these, no worries on carbon fiber abrassive nature on your brass nozzle, but if you plan to print much more of the carbon fiber PC, def get a hardened nozzle or you will eventually wear out your brass nozzle).
Also, Prusa has PETG with carbon fiber, same thing, just not quite as rigid, but stronger than PETG by itself (same advice on the nozzle).
1 Like
Hey JC_Wren, I added myself to the list, just don’t know where the dimple set currently is and who has it.
1 Like
@DavidSetness Hey David, was just checking to see if you received the dimple dies, are done with them, and have shipped them to the next person yet.
thanks,
chris
I did and they were sent on to next person. Worked great.
I sent them to ccraft
Just checking in to see where list stands? Last info in thread is that Mr Craft had it in August?
Hello, new here and wanted to see if anyone knows where the die is? Id like to get it asap thanks!!
Here is a link to the thread where the dies are being shared. You can add your name to that list.
https://forum.langmuirsystems.com/t/bar-sink-drain-dimple-die/22761/363