Computer code is not my area of knowledge at all - I was asking some of the others here how difficult it would be to change the code to get rid of the double tap pedal first, then ALL of the “you are doing this - click ok” prompts that neuter this machine. A signal interrupter via an Arduino wired in the pedal line i think could solve the double tap problem, but all of the nannies in the code is another animal to tackle. As far as the oil in the electrical cabinet, yes - my first thought was when, not if ~oil goes everywhere, it’s going to be very bad. Mineral oil is the only oil i know of that is compatible with electronics and computers - entire desktop boards, CPU’s, drivers etc can literately be submersed in mineral oil without issue - I have seen gamers put their computer systems in fish tanks and 5 gallons of mineral oil for superior cooling. The very first think I did not install the jog arm extensions, never even put them on the machine - i knew that would be a headache before I even got the machine delivered - here was my solution JOG ARM aka JarJar Binks FIX - #10 by AUminer AND Safety Override - T25 Press Brake - #7 by AUminer