I decreaced my cut Height from .06 to .05 and its cutting a lot cleaner.
Here are my settings that I am happy with the results with.
30 amp 65 lbs of air.
Feed 180 ipm
Pierce Delay .1 sec
Pierce Height .15 in
Plunge Rate 10 ipm
Cut Height .05
I decreaced my cut Height from .06 to .05 and its cutting a lot cleaner.
Here are my settings that I am happy with the results with.
30 amp 65 lbs of air.
Feed 180 ipm
Pierce Delay .1 sec
Pierce Height .15 in
Plunge Rate 10 ipm
Cut Height .05