Hey everybody, just wanted to post a couple links that allow you to download our hand crafted MR-1 tool library for Fusion 360 as well as a video tutorial to get you started.
Download our MR-1 tool library from Google Drive - https://drive.google.com/file/d/1u9_f0hm60q51Zk2a-trTuuxBSXzLR3Iz/view?usp=drive_link
Tool Library Tutorial - https://www.youtube.com/watch?v=kg_APYZRcyE
Let us know if you have any questions and feel free to post your own libraries here to show off.
Thanks Jake. It downloaded to fusion without any problem. Very nice job 
Any help to download this, the link doesn’t seem to work for me. Any help would be appreciated.
Download langmuirs tool library to your computer.
Watch this video from the 2:00 minute mark. You got this. Easy after you do it once or twice. How to import a tool library into Fusion 360's manufacturing workspace - YouTube
Got it, Thank You
Comparing the parameters for drilling in the “Cutting Parameters” topic and I noticed that there is a big difference between that and the parameters entered in the tool library. Are these based on the assumption of having the high powered driver for the Z axis versus the standard driver the MR-1 comes with?
I’ve imported the tool library. However, I cannot find the MR-1 in the Machine Library. Do I need to specify a specific machine when creating setups? I am totally new to this, though I did once watch over someone’s shoulder when he created code for a CNC router 
I did notice that in Jake’s intro video (the Coffee Coaster), he did not select a machine.
That’s true, we always leave the machine unselected when programming in Fusion. I’ve heard from a few people who use the generic 3-axis but sometimes they run into differences between those settings and the actual travel limits on the MR-1.
I just updated the Tool Library to remove some excess speed and feed settings leftover by default from Fusion and also tweaked a few of them. Shout out to some fellas on the MR-1 Facebook page who pointed it out. Let me know if you guys see any typos or if a setting needs to be adjusted.
Do you have a link to the updated Tool Library. I looked for it but could not find it.
@billh68 I updated the link at the top of this thread so you should be able to grab it there. It took the link a minute to update when I first did it so let me know if it gives you any fuss.
Got it and imported just fine.
Thank you