Is there a problem with this code? (Solved)

Canaan108 · December 12, 2022, 12:00pm

It simply will not cut(v1.6-af)
G90 G94
G17
G20
H0

(2D Profile1)
G0 X0.24 Y1.6225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y1.54 F80.
G1 X0.84 F80.
H0
M5
G0 Z0.25

G0 X1.54 Y1.6225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y1.54 F80.
G1 X2.14
H0
M5
G0 Z0.25

G0 X2.74 Y1.6225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y1.54 F80.
G1 X3.34
H0
M5
G0 Z0.25

G0 X4.04 Y1.6225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y1.54 F80.
G1 X4.64
H0
M5
G0 Z0.25

G0 X4.04 Y4.8225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y4.74 F80.
G1 X4.64
H0
M5
G0 Z0.25

G0 X2.74 Y4.8225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y4.74 F80.
G1 X3.34
H0
M5
G0 Z0.25

G0 X1.54 Y4.8225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y4.74 F80.
G1 X2.14
H0
M5
G0 Z0.25

G0 X0.24 Y4.8225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y4.74 F80.
G1 X0.84
H0
M5
G0 Z0.25

G0 X0.24 Y8.0225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y7.94 F80.
G1 X0.84
H0
M5
G0 Z0.25

G0 X1.54 Y8.0225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y7.94 F80.
G1 X2.14
H0
M5
G0 Z0.25

G0 X2.74 Y8.0225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y7.94 F80.
G1 X3.34
H0
M5
G0 Z0.25

G0 X4.04 Y8.0225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y7.94 F80.
G1 X4.64
H0
M5
G0 Z0.25

G0 X4.04 Y11.2225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y11.14 F80.
G1 X4.64
H0
M5
G0 Z0.25

G0 X2.74 Y11.2225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y11.14 F80.
G1 X3.34
H0
M5
G0 Z0.25

G0 X1.54 Y11.2225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y11.14 F80.
G1 X2.14
H0
M5
G0 Z0.25

G0 X0.24 Y11.2225
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 Y11.14 F80.
G1 X0.84
H0
M5
G0 Z0.25

(2D Profile2)
G0 X5.0644 Y2.9398
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X4.8675 F80.
G1 Y0.04
G2 X4.84 Y0.0125 I-0.0275 J0.
G1 X3.84
G2 X3.8125 Y0.04 I0. J0.0275
G1 Y3.04
G2 X3.84 Y3.0675 I0.0275 J0.
G1 X4.09
G2 X4.1175 Y3.04 I0. J-0.0275
G3 X4.5625 I0.2225 J0.
G2 X4.59 Y3.0675 I0.0275 J0.
G1 X4.84
G2 X4.8675 Y3.04 I0. J-0.0275
G1 Y2.9398
G1 X5.0644
H0
M5
G0 Z0.25

G0 Y6.1398
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X4.8675 F80.
G1 Y3.24
G2 X4.84 Y3.2125 I-0.0275 J0.
G1 X3.84
G2 X3.8125 Y3.24 I0. J0.0275
G1 Y6.24
G2 X3.84 Y6.2675 I0.0275 J0.
G1 X4.09
G2 X4.1175 Y6.24 I0. J-0.0275
G3 X4.5625 I0.2225 J0.
G2 X4.59 Y6.2675 I0.0275 J0.
G1 X4.84
G2 X4.8675 Y6.24 I0. J-0.0275
G1 Y6.1398
G1 X5.0644
H0
M5
G0 Z0.25

G0 Y9.3398
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X4.8675 F80.
G1 Y6.44
G2 X4.84 Y6.4125 I-0.0275 J0.
G1 X3.84
G2 X3.8125 Y6.44 I0. J0.0275
G1 Y9.44
G2 X3.84 Y9.4675 I0.0275 J0.
G1 X4.09
G2 X4.1175 Y9.44 I0. J-0.0275
G3 X4.5625 I0.2225 J0.
G2 X4.59 Y9.4675 I0.0275 J0.
G1 X4.84
G2 X4.8675 Y9.44 I0. J-0.0275
G1 Y9.3398
G1 X5.0644
H0
M5
G0 Z0.25

G0 Y9.777
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X4.8675 F80.
G1 Y9.64
G2 X4.84 Y9.6125 I-0.0275 J0.
G1 X3.84
G2 X3.8125 Y9.64 I0. J0.0275
G1 Y12.64
G2 X3.84 Y12.6675 I0.0275 J0.
G1 X4.09
G2 X4.1175 Y12.64 I0. J-0.0275
G3 X4.5625 I0.2225 J0.
G2 X4.59 Y12.6675 I0.0275 J0.
G1 X4.84
G2 X4.8675 Y12.64 I0. J-0.0275
G1 Y9.777
G1 X5.0644
H0
M5
G0 Z0.25

G0 X3.0386 Y12.6144
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X3.0279 Y12.4178 F80.
G3 X3.2625 Y12.64 I0.0121 J0.2222
G2 X3.29 Y12.6675 I0.0275 J0.
G1 X3.54
G2 X3.5675 Y12.64 I0. J-0.0275
G1 Y9.64
G2 X3.54 Y9.6125 I-0.0275 J0.
G1 X2.54
G2 X2.5125 Y9.64 I0. J0.0275
G1 Y12.64
G2 X2.54 Y12.6675 I0.0275 J0.
G1 X2.79
G2 X2.8175 Y12.64 I0. J-0.0275
G3 X3.0279 Y12.4178 I0.2225 J0.
G1 X3.0386 Y12.6144
H0
M5
G0 Z0.25

G0 X3.039 Y9.4144
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X3.0318 Y9.2177 F80.
G3 X3.2625 Y9.44 I0.0082 J0.2223
G2 X3.29 Y9.4675 I0.0275 J0.
G1 X3.54
G2 X3.5675 Y9.44 I0. J-0.0275
G1 Y6.44
G2 X3.54 Y6.4125 I-0.0275 J0.
G1 X2.54
G2 X2.5125 Y6.44 I0. J0.0275
G1 Y9.44
G2 X2.54 Y9.4675 I0.0275 J0.
G1 X2.79
G2 X2.8175 Y9.44 I0. J-0.0275
G3 X3.0318 Y9.2177 I0.2225 J0.
G1 X3.039 Y9.4144
H0
M5
G0 Z0.25

G0 X3.0336 Y6.2152
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X2.9842 Y6.0246 F80.
G3 X3.2625 Y6.24 I0.0558 J0.2154
G2 X3.29 Y6.2675 I0.0275 J0.
G1 X3.54
G2 X3.5675 Y6.24 I0. J-0.0275
G1 Y3.24
G2 X3.54 Y3.2125 I-0.0275 J0.
G1 X2.54
G2 X2.5125 Y3.24 I0. J0.0275
G1 Y6.24
G2 X2.54 Y6.2675 I0.0275 J0.
G1 X2.79
G2 X2.8175 Y6.24 I0. J-0.0275
G3 X2.9842 Y6.0246 I0.2225 J0.
G1 X3.0336 Y6.2152
H0
M5
G0 Z0.25

G0 X1.8503 Y6.2165
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X1.9294 Y6.0362 F80.
G3 X2.0625 Y6.24 I-0.0894 J0.2038
G2 X2.09 Y6.2675 I0.0275 J0.
G1 X2.34
G2 X2.3675 Y6.24 I0. J-0.0275
G1 Y3.24
G2 X2.34 Y3.2125 I-0.0275 J0.
G1 X1.34
G2 X1.3125 Y3.24 I0. J0.0275
G1 Y6.24
G2 X1.34 Y6.2675 I0.0275 J0.
G1 X1.59
G2 X1.6175 Y6.24 I0. J-0.0275
G3 X1.9294 Y6.0362 I0.2225 J0.
G1 X1.8503 Y6.2165
H0
M5
G0 Z0.25

G0 X1.846 Y9.4151
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X1.8921 Y9.2237 F80.
G3 X2.0625 Y9.44 I-0.0521 J0.2163
G2 X2.09 Y9.4675 I0.0275 J0.
G1 X2.34
G2 X2.3675 Y9.44 I0. J-0.0275
G1 Y6.44
G2 X2.34 Y6.4125 I-0.0275 J0.
G1 X1.34
G2 X1.3125 Y6.44 I0. J0.0275
G1 Y9.44
G2 X1.34 Y9.4675 I0.0275 J0.
G1 X1.59
G2 X1.6175 Y9.44 I0. J-0.0275
G3 X1.8921 Y9.2237 I0.2225 J0.
G1 X1.846 Y9.4151
H0
M5
G0 Z0.25

G0 X1.841 Y12.6144
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X1.8482 Y12.4177 F80.
G3 X2.0625 Y12.64 I-0.0082 J0.2223
G2 X2.09 Y12.6675 I0.0275 J0.
G1 X2.34
G2 X2.3675 Y12.64 I0. J-0.0275
G1 Y9.64
G2 X2.34 Y9.6125 I-0.0275 J0.
G1 X1.34
G2 X1.3125 Y9.64 I0. J0.0275
G1 Y12.64
G2 X1.34 Y12.6675 I0.0275 J0.
G1 X1.59
G2 X1.6175 Y12.64 I0. J-0.0275
G3 X1.8482 Y12.4177 I0.2225 J0.
G1 X1.841 Y12.6144
H0
M5
G0 Z0.25

G0 X-0.1844 Y9.7732
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X0.0125 F80.
G1 Y12.64
G2 X0.04 Y12.6675 I0.0275 J0.
G1 X0.29
G2 X0.3175 Y12.64 I0. J-0.0275
G3 X0.7625 I0.2225 J0.
G2 X0.79 Y12.6675 I0.0275 J0.
G1 X1.04
G2 X1.0675 Y12.64 I0. J-0.0275
G1 Y9.64
G2 X1.04 Y9.6125 I-0.0275 J0.
G1 X0.04
G2 X0.0125 Y9.64 I0. J0.0275
G1 Y9.7732
G1 X-0.1844
H0
M5
G0 Z0.25

G0 Y6.577
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X0.0125 F80.
G1 Y9.44
G2 X0.04 Y9.4675 I0.0275 J0.
G1 X0.29
G2 X0.3175 Y9.44 I0. J-0.0275
G3 X0.7625 I0.2225 J0.
G2 X0.79 Y9.4675 I0.0275 J0.
G1 X1.04
G2 X1.0675 Y9.44 I0. J-0.0275
G1 Y6.44
G2 X1.04 Y6.4125 I-0.0275 J0.
G1 X0.04
G2 X0.0125 Y6.44 I0. J0.0275
G1 Y6.577
G1 X-0.1844
H0
M5
G0 Z0.25

G0 Y3.377
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X0.0125 F80.
G1 Y6.24
G2 X0.04 Y6.2675 I0.0275 J0.
G1 X0.29
G2 X0.3175 Y6.24 I0. J-0.0275
G3 X0.7625 I0.2225 J0.
G2 X0.79 Y6.2675 I0.0275 J0.
G1 X1.04
G2 X1.0675 Y6.24 I0. J-0.0275
G1 Y3.24
G2 X1.04 Y3.2125 I-0.0275 J0.
G1 X0.04
G2 X0.0125 Y3.24 I0. J0.0275
G1 Y3.377
G1 X-0.1844
H0
M5
G0 Z0.25

G0 X0.5503 Y3.0165
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X0.6294 Y2.8362 F80.
G3 X0.7625 Y3.04 I-0.0894 J0.2038
G2 X0.79 Y3.0675 I0.0275 J0.
G1 X1.04
G2 X1.0675 Y3.04 I0. J-0.0275
G1 Y0.04
G2 X1.04 Y0.0125 I-0.0275 J0.
G1 X0.04
G2 X0.0125 Y0.04 I0. J0.0275
G1 Y3.04
G2 X0.04 Y3.0675 I0.0275 J0.
G1 X0.29
G2 X0.3175 Y3.04 I0. J-0.0275
G3 X0.6294 Y2.8362 I0.2225 J0.
G1 X0.5503 Y3.0165
H0
M5
G0 Z0.25

G0 X1.8507 Y3.0167
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X1.9329 Y2.8378 F80.
G3 X2.0625 Y3.04 I-0.0929 J0.2022
G2 X2.09 Y3.0675 I0.0275 J0.
G1 X2.34
G2 X2.3675 Y3.04 I0. J-0.0275
G1 Y0.04
G2 X2.34 Y0.0125 I-0.0275 J0.
G1 X1.34
G2 X1.3125 Y0.04 I0. J0.0275
G1 Y3.04
G2 X1.34 Y3.0675 I0.0275 J0.
G1 X1.59
G2 X1.6175 Y3.04 I0. J-0.0275
G3 X1.9329 Y2.8378 I0.2225 J0.
G1 X1.8507 Y3.0167
H0
M5
G0 Z0.25

G0 X3.0293
G92 Z0.
G38.2 Z-5. F100.
G38.4 Z0.5 F20.
G92 Z0.
G0 Z0.04 (IHS Springback + Backlash)
G92 Z0.
G0 Z0.08 (Pierce Height)
M3
G4 P0.5
G0 Z0.05 (Cut Height)
H1
G1 X2.9471 Y2.8378 F80.
G3 X3.2625 Y3.04 I0.0929 J0.2022
G2 X3.29 Y3.0675 I0.0275 J0.
G1 X3.54
G2 X3.5675 Y3.04 I0. J-0.0275
G1 Y0.04
G2 X3.54 Y0.0125 I-0.0275 J0.
G1 X2.54
G2 X2.5125 Y0.04 I0. J0.0275
G1 Y3.04
G2 X2.54 Y3.0675 I0.0275 J0.
G1 X2.79
G2 X2.8175 Y3.04 I0. J-0.0275
G3 X2.9471 Y2.8378 I0.2225 J0.
G1 X3.0293 Y3.0167
H0
M5
G0 Z0.25

M30
(PS80)

Knick · December 12, 2022, 12:21pm

Hmmmm… is everything plugged in?
That’s a pretty vague question.

Think about what people might need to help you and provide it.

Canaan108 · December 12, 2022, 12:33pm

You’re right about it being vague, and for that I apologize.

Phillipw · December 12, 2022, 12:39pm

So how is it not cutting. What is it attempting to do?

Canaan108 · December 12, 2022, 12:44pm

It is designed in two setups, first a relief cut, then a profile. It cuts the reliefs fine, cuts one profile (out of 12) then quits.

Phillipw · December 12, 2022, 12:46pm

Any errors?

Pictures?

TinWhisperer · December 12, 2022, 1:09pm

@Canaan108

I was looking through the code and there are 2 suggestions I have that are not related to the stopping mid program issue

I would eliminiate the lead in for the relief cut

Also I would cut the relief for one piece then the outside then move on to the next piece .

Does to always stop on line 328 ?

Air not keeping up?

Likely @Phillipw said any pop ups??

ds690 · December 12, 2022, 2:03pm

Nothing stands out as being wrong in that code. The only odd thing I see is the .25" retract height, but that won’t stop the program. The standard retract height is 1" to avoid tip ups.

Canaan108 · December 12, 2022, 7:13pm

Its weird, I’ve never had a problem cutting patterns before.

Canaan108 · December 12, 2022, 7:14pm

I don’t think it’s the air. It just stops mid-cut.

Canaan108 · December 12, 2022, 7:23pm

No pop ups, retract height I will re-configure. (I’m still learning).

Canaan108 · December 12, 2022, 7:25pm

As far as line 328, it seems to get stuck right at that spot every time.

Knick · December 12, 2022, 7:50pm

If you get a drop in air pressure it will stop. You could verify this by watching the air pressure on your cutter and see what it reads just before 328.
What is your air pressure while cutting?
Could your cutter be shutting off due to duty cycle?

Canaan108 · December 14, 2022, 11:42am

So I rotated it 90 degrees, it cut out fine. I don’t understand why orientation has anything to do with it.