I do want to make it clear: There are a lot more wonderful projects out there that have been posted. I hope that others will show their project on this thread.
I do remember few others that I forgot to add:
[IMG_1659(1)]
[IMG_1660]
[IMG_1661]
Well 1 year later and still working on the Etsy dog. Getting closer to final paint. I still need to fill some pin holes and minor imperfections. I plan on painting it matt black so it needs to be almost perfect.
High dollar Muskrat Guards. 12.5 inch exhaust. 75’ twin 2200hp MTU diesels. Aluminum prototype. Can’t lift the boat out of the water so diver will have to make sure the fit before cutting of 316 Stainless steel. [20251216_143134]
This guy keeps coming up:
I cut one of these as a gift for a friend who runs an auto repair business. Cut quality was poor due to a beveling issue I recently developed. But with 16 & 18 gauge it’s not so bad I’d scrap the pieces. I just haven’t had time to investigate yet.
Chris Yops posted the top portion to Fireshare:
[20250603_140312]
All done
I am giving this to the Company I work for as a Christmas gift. (Yes I am kissing up a little) they have been very good to my family. My son is a third generation employee. The tomorrow transformed is as small as I can get a quality cut with my Miller 625 with hand torch. There are no fine cut tips for this torch.
Thanks again to Jim he helped with fixing up the eagle file.
[Eagle Pepper Done]
NOW TIME TO CLEAN THE BENCH
I cut this a while back, thanks @ChelanJim for the help in getting the file cleaned up as well as sharing his knowledge. Just finished it up today.
[20240808_175059]
my sister got the money shot photo
[image]
My garden shaman is finally home!
7 months in the making. Every step of the way was a new learning experience: making a low-poly design out of steel (watched a ton of paper craft and cosplay construction videos), making a wire buck and forming steel with an english wheel (watched many custom car body work videos), forming a curved surface with 3D scan data, creating a curved-surface flat cut pattern using Blender’s UV unwrapping and finally pouring an mounting base using Quikrete and anchor bol…
Alright…I think I am done now. I had to find this one that ToolBoy did. When you see it, you will know why it needed to be included:
so after a long long time I am going to share my latest work…
A friend (yes I have a few) brought me an invitation he recieved to a special birthday party in Austria.
it was a card that was 4x6 in size…and it was an artwork done by specailly for his friend by a local artist in Austria.
the card has special scenes in it specific to his youth and growing up…it is very dear to him…
My friend asked me to possibly make a metal reproduction for him to take over to Austria in a couple of weeks…
th…
3 Likes
