This forum seems to always have quick right answers so here goes. I’m a hobbyist so I use the free version of 360. I have an issue that several of my saved designs of the ten available are stuck in an upload mode every time I use the program. Its an issue as they count against the 10 I can save. I can work for hours on a design and they still haven’t uploaded. I can close out and come back the next day and they still haven’t uploaded. I’m not even using the designs but I can’t open them to either delete or make read only. Anyone else have this issue and how is it corrected?
Assuming you’re on the latest version of Fusion 360 I’d say this is a network settings issue on your computer itself.
You may need to add port forwarding on specific ports.
1 Like
@Kwikfab ‘s post surprised me, so I checked it out and found:
Autodesk Fusion 360 requires open access to internet ports 80 and 443 (HTTP/HTTPS) and specific security exceptions for its domains to function correctly. Essential traffic includes SSL 3.0 and TLS 1.2+ for secure communication, requiring firewall and proxy configurations that allow uninterrupted, non-inspected traffic to Autodesk servers
To invesitgate:
Troubleshooting Connectivity
-
Network Diagnostic Tool: Use the Network Diagnostic Test within the Autodesk Fusion Service Utility to identify blocked ports.
-
Proxy Setup: If your network uses a proxy, configure the settings in Fusion via Preferences > Network.
-
Security Software: Ensure anti-virus software is not blocking traffic, as detailed in this guide to configuring proxies and firewalls for Windows.
1 Like