Well yes you could. But the kerf of a 20 amp tip is 0.65mm/.025" and the 30 amp is 0.8mm/.030". The 20 amp tips work best on plasma cutter that go down to 10 or 15 amps best and on metals 18,20,22,24 gauge.
Well yes you could. But the kerf of a 20 amp tip is 0.65mm/.025" and the 30 amp is 0.8mm/.030". The 20 amp tips work best on plasma cutter that go down to 10 or 15 amps best and on metals 18,20,22,24 gauge.