Anybody interested in my MR1 setup? Located in Ocala FL

moving in about 2 months from florida to colorado and was wondering if anybody in florida was interested in my current setup. i had pre-ordered machine back in september of 2022 and received in march 2023. was not put together until late august 2023 and due to work schedule i was not able to use it until november 2023 and have put since then about 150-200 hours on it. machine has no issues at all as well as some upgrades.

MR1:
MR1 Base Machine
Gantry enclosure
Flood Coolant System (first version)
Leveling Feet
Transport Brackets
1-High Powered Z driver (1 new additional high powered driver included)
2-Low Profile Vises with 1 set of aluminum soft jaws inlcluded
Toe Clamp Kit
Baseplate Threaded Plugs
Vice Parallel Set (additional set of 6" parallels included)
V1 Touch Probe and Tool Setter
Dial Test Indicator
Wireless Keypad and Holder
Tool Setter Riser
Traming Tool
Spindle Collet Wrench Holder
Collet Wrench/Blow Gun Hanger
Flood Coolant Relay Box
Part Stop Kit
Remote E-Stop Button
Custom Coolant Hose Wash Down Kit
Custom CNC Touch Probe Dock
Custom Door Inner Windows
Custom Sliding Windows on the Right Side
Collet Set

Tools Included:
2 sets of ferrous 4-Flute Endmills (NEW)
2 sets of Non-Ferrous 2-Flute Endmills (NEW)
2 sets of Ferrous 4-Flute Ball Mills (NEW)
2 sets of Non-Ferrous 2-Flute Ball Mills (NEW)
3 Chamfer Mills
1 Roughing End Mill
FlyCutter with 8 New Inserts
Thread Mill Set
Stub Index Drill Set

Also Included:
Ingersol-Rand Air Compressor with Industrial Motor
Air Compressor Air/Water Filter
20ft Air Hose
Blow Gun
2-Kobalt 36" Workbenches with Lights

Price: $10k for everything. shipping not included. buyer responsible for shipping. located in Ocala Fl. more pics available

If I had not blown my nut on a lathe, I would say bring it with you, and we can meet up.

where you located at? i have to sell before i move.

I live in Colorado, east of Denver.

Just spent $23k on my lathe. Don’t have $$ for another machine. Two months ago however…

gotcha, no worries

Okay, you can’t post that you got a new machine in a machining forum and not tell us what you got. Not cool man, not cool.

I did. Thread “Not holla2040 new tool day

3 Likes

Darn man, out here in Florida and finally just received mine 14 days ago. Got all of the things you mentioned too lol.

1 Like

However, I am interested in some of those mods. Most specifically the sliding door windows on the right seem pretty great!

the sliding doors help alot to air out the rails from chips. i just used an aluminum track from lowes and some plexiglass