hey i saw an old topic about this but figured itd be better to start a new one.
when i go to upload dxf files i made from 360 to firecontrol to burn its telling me im using the post processor for the mach three and to download the fusion one for firecontrol.
i have the z axis/thc upgrade so i picked that one tried to open it and it takes me to files.org and wants me to download something from their lists. after i downloaded and didnt open again i went to 360 and tried to resetup one of my programs to see and langmuir is in it now. chose it so entirely redid setup and it still doesnt show on firecontrol. any advice on what im doing wrong?
I just finished my first test program on Fusion 360 and ran into the same issue your having. The FireControl brought up this error message; “This program appears to be incorrectly generated using a Post Processor for Mach3” I went to Langmuir web and downloaded another post processor per their instructions, reposted the part to be cut and got the same error message. I double checked the post processer on Fusion and it confirmed the change to Version: 43757 and the date and time. Still no good and waiting to hear back from Langmuir.
Did you find what the issue was and can you share?