Hello everyone! I am having a processing issue, this is the error I am getting:
Information: Configuration: Easel
Information: Vendor: Inventables, Inc.
Information: Posting intermediate data to ‘C:\Users\Preston\AppData\Local\Fusion 360 CAM\nc\1001.nc’
Error: Failed to post process. See below for details.
…
Code page changed to ‘1252 (ANSI - Latin I)’
Start time: Wednesday, August 4, 2021 11:08:53 AM
Code page changed to ‘20127 (US-ASCII)’
Post processor engine: 4.5771.0
Configuration path: C:\Users\Preston\AppData\Local\Autodesk\Autodesk Fusion 360\KJZ6M539MA3E\W.login\M\D20210613420296356\CAMPosts\f360-easel.cps
Security level: 1000
Include paths: C:\Users\Preston\AppData\Local\Autodesk\Autodesk Fusion 360\KJZ6M539MA3E\W.login\M\D20210613420296356\CAMPosts
Configuration modification date: Wednesday, August 4, 2021 1:15:35 AM
Output path: C:\Users\Preston\AppData\Local\Fusion 360 CAM\nc\1001.nc
Checksum of intermediate NC data: 8aa71c9e10379eb53ef7700f775122ac
Checksum of configuration: f722a5905055e04329ac0fa4e8e55f75
Vendor url: https://inventables.com
Legal: Copyright (C) 2012-2015 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.10564
…
###############################################################################
Error: Waterjet, laser, and plasma cutting toolpath is not supported by the post configuration.
Failed while processing onOpen().
###############################################################################
Error:
Error: Failed to invoke ‘onOpen’ in the post configuration.
Error: Failed to execute configuration.
Stop time: Wednesday, August 4, 2021 11:08:53 AM
Post processing failed.
Do I just need to update my post processor in fusion? I thought I did, I am using the cloud library with the file I found on this forum.