Did you upgrade from an original crossfire with mach3 to a Pro? if so then you need to add the new post processor for firecontrol.
no I have not made any changes at all, yesterday it was fine and today this is what i got.
CAD/CAM with Fusion360 | Langmuir Systems Scroll down to Post Processing and start with section A5 to install the post processor. There must have been an update to Fusion that lost your post processor.
Ok, thanks I’ll give it a try.
I’m an idiot. Lol. I can’t get to the setup menu. It keeps sending me back to NC Program which is the photo I posted
Here’s a link to the last time this topic came up.
goes through setting up your post processor in fusion 360 pretty thoroughly.
1 Like
Ok, I’ll give that a shot.
I had no problem getting to the post process before today and when I hover over it with my cursor it shows the menu I want but when I click on it I get the NC process that I showed a photo of.
I noticed that fusion had an update .some of the menus have changed. The font and the window bubbles are even a little different.
I wonder when it updated if it started using a default folder to look for the Post
Maybe when you set it up originally you set it up to a custom folder and the update now isn’t looking for it there?
Just theorizing.
I originally did have it setup wrong when I first got the machine and then I fixed it by doing what you just recently told me. And today I’m lost
It’s not recognizing firecontrol and I don’t know how to install it.
This is where it posts on my computer
here is where you can reenter it.
Post library menu
find firecontrol in your file system .
Maybe download?
this is what it looks like correctly installed
That’s where I’m at but cannot enter anything in the post unless it’s in the library. And I can’t find it in the library
I can find the fire control file and I tried to copy and paste it into the post but it won’t open up and let me paste
I just finally got to try it and I think it worked. At least i found it in my file. I’ll try using it tomorrow. I would like to thank those of you who helped me very very much for helping me. I really do appreciate it
2 Likes
could you post details how you solved your issue in case somebody else finds the thread in the future with the same problem.