Mach 3 configurations

CrossFire ® Troubleshooting
1

We had licensing issues with Mach3 during the week, got them figured out and are set to cut. It worked great in demo mode (before the licensing issues), was told by Mach3 support yesterday we should be good to go, went to cut this morning and nothing…

We had to delete everything (profiles, plug-ins etc) and reinstall

IMG_3846
IMG_38462840×1763 1.6 MB
…hoping there is an easy fix. I don’t remember seeing spindle speed or the zero 4 before…but I may just not be remembering. Looking for help to get my configurations correct so we can cut! :slight_smile:

Thank you to anyone who may be able to help! :slight_smile:

-Allison

2

You will have to reinstall the crossfire plug in for Mach 3. Then open that version every time.

3

Is that Mach3 or 4? I don’t recall seeing 4-axis control in Mach 3.

Also as was noted make sure you have the Crossfire plugin in the right directory. It looks like you did get the Crossfire profile installed okay.

4

oops wrong thread. Me bad