iPad set up or back to a computer

[ChelanJim]

@Derek

And it was a pain to get it free before.

Follow this thread. You just want to make sure you download the “Personal” NOT the “Trial” copy:

I got my 3x4 pro table and cant find the free 360 download

You want to go the the Personal Hobby download page: When your first year expires, renew the Personal/Hobby again if you still fit the criteria. But be aware, you will not be allowed to “renew” until the 365 days have expired. And, use the same logon info and you will be returned to your files. You don’t want the free trial, here is a screen shot that makes it a bit clearer: [FusionPersonalUse]

As far as programs you absolutely need, to make it simple:

If you have the pro you will need: FireControl (download from Langmuir). You will also find the Post Processor that your CAM program will need (Fusion 360 or SheetCAM). This link has these programs:
https://www.langmuirsystems.com/downloads

So, you probably remember, you primary choices for CAM (Manufacturing to G-code) is Fusion 360 or SheetCAM.

Pros/Cons:
Fusion 360: PRO: Very comprehensive and lots of advance technical drawing ability. Includes 2D/3D CAD and CAM. Free for personal use and hobby. CON: Very comprehensive and lots of advance technical drawing ability.

SheetCAM: PRO: Fairly easy to learn and does a GREAT job of manufacturing g-code from your CAD. CON: Cost $150, you will need another program for CAD.

@Derek

can get this all set up again on my IPad Pro 5th generation or if I have to get a new laptop.

You will need Windows 10/11 or Mac for FireControl. i don’t believe you will be able to use an iPad for FireControl but you could use a MiniComputer. The CAD program is going to need more horse power than what your iPad can deliver (from what I gather…wait to hear other responses on the type of computer.)