Search on “size DXF” in the forum and there are some decent write-ups. There’s also a video that Langmuir posted on using external files on the tutorials page, especially #5 & 6.
http://www.langmuirsystems.com/tutorials
In Fusion you’ll use the Scale command. Here’s a post I did with pictures & arrows.
Here’s some more detail in case that helps. If not, I’ll try to do a screen record of doing this tonight. These are Windows based directions so if you’re on a Mac they’re likely pretty close to the same but I can’t confirm that
First, there are 2 types of scaling - the sketch or components. Unfortunately they work slightly differently and F360 doesn’t really make it clear when you’re not doing it right for what you’re trying to do. I’m going to outline how to scale a whole DXF you’ve brought in…
2 Likes