I am not able to jog machine

I am getting two alarms, torch location is outside of machine travel limits. Home to enable jogging and the loaded program extends beyond the machine travel limits. Any suggestions?

Call our XR engineer Cameron, he’ll get you squared away. (936) 235-3991

1 Like

I know this is a little old but replying still…

I had this happen to me once or twice. The machine had a limit switch engaged so it throw an error and wouldnt allow the machine to be jogged.

The fix was to power off the machine and turn the motor by hand until the limit switch was disengaged. Power the machine back on and home the machine as normal.