@Veetek Yes, I have been using the 1/16 spacer to set the gap. I have to pull my table out from a corner whenever I want to use it, and I almost never take the time to re-level once it’s in position (unless it’s grossly out-of-whack), so I almost always have a varying gap across the length and width of the part I’m cutting. I usually set the gap in one corner, jog to the other corners, and then manually re-adjust so that I average out at 1/16 (roughly). It has worked well enough for hobby cutting purposes. So yes, 1/16 gap works pretty well.
1 Like