When I load my G Code into Mach 3 it appears to fully load in the window but will not display the full cut in the tool path diagram. I tried editing the tool path but still won’t make it more than a quarter into the G code. The photo I attached shows where I have scrolled down on the code and how the tool path won’t fully generate. Any help would be greatly appreciated. ![39%20PM|690x412]
(upload://mSSHnqtsW6vM2fEWaPvrbiY2Sq.png)
I think youre in the demo mode of mach3. Im not a computer person, but I think that is your issue. Its only loading 500 lines.
2 Likes
that makes sense. I was thinking it had to be something on the line of not being able to load that many lines.
Yep that’s demo mode
I bought a full version of Mach 3 on Ebay for $30’s. There is a fella on there that buys bulk licenses and sells them to the public. Obviously purchase at your own risk, but he had a ton of positive reviews and was excellent to work with. I bought mine, it loaded right up, unlocked to a full version and works great with my Crossfire.
I bought one and he scammed me. Wouldnt send me a code. Had to get paypal to refund me
1 Like
Not sure there’s a way to buy “bulk licenses” from Artsoft, but one way to tell if it’s legit and not someone just selling their (or someone else’s) license code is to see if it comes up in your name or something cryptic like C56743.
@jasonshetfield you bought what they are calling a shared license. It will work but you get no support from mach with it