First time cutting 1/2 inch plate

[72Pony]

Here is the method I used on the second set of holes

Cutting from the Center of a Hole: Fusion 360

I’m still learning Fusion, but I worked out a method to “Start cut from Center of Hole”. Since this has been a topic, and I don’t believe I’ve heard this answer I thought I’d post it. It’s not as simple as a single button click, but here it is using a .125 hole as an example: [image] Lead-in radius to 0: The cut goes straight from lead-in distance to edge without curving. Lead-in sweep angle to 90 deg: this makes the cut move in perpandicular to the circumference. Lead-in Distance: Sorry……