Casters and shelf inspired by Jr

Projects
1

I have been working on this for a few days finally wrapped it up. Thanks to @num1husker for the inspiration and his pictures. If only my shop looked like his!

881C5591-75D1-4E94-8DB7-78353ADDE1CE_1_102_o
881C5591-75D1-4E94-8DB7-78353ADDE1CE_1_102_o1920×1440 566 KB

DDCD3945-1F89-44D9-A23D-8826FF26D9F1_1_102_o
DDCD3945-1F89-44D9-A23D-8826FF26D9F1_1_102_o1536×2048 622 KB

91BD2BCB-DFEE-46E0-814E-6E129F5CDFD1_1_102_o
91BD2BCB-DFEE-46E0-814E-6E129F5CDFD1_1_102_o1920×1440 394 KB

5 Likes
2

Looking very nice, glad I could help.
One thing I noticed on my castors is I needed to exercise them regularly or else they got a memory spot on them. I would also like to point out it’s not the location that the art is created, it’s the art itself!!

2 Likes
3

I gotta get organized! It’s driving me crazy! The CF pro was the straw that broke the camel’s back of disorganization. Hopefully being able to move it around will help.

4

Sharp looking!!! How do you adjust for level - are the castors threaded - they look like they are welded to the tube. Thanks

5

Thanks! I level it using threaded rod in the nut pictured below. I used 1/2-13 but wish I used something bigger like 3/4 or 1 inch.

Casters are bolted on to the caster plate that is welded to the tube. I can make the files available if you want them.

image
image720×1138 87.2 KB

1 Like