Starting a live stream making the pattern to a sheet metal square to round.
545am mst
nice to see a couple people in the chat today! @KX9M included
You can away comment on the forum too if you dont have a twitch account.
here is an older topic i made about square to rounds
I have made quite a few square to rounds over the years but this is the first using a CNC.
Over the years I became very familiar with laying out and fabricating square to rounds by hand.
When SketchUp came came out I started laying out fittings in that CAD environment , Acquiring all the true lengths, then stepping out the points with a compass on my sheet metal.
Then I bought a bigger printer and could print out sometime 20 pieces of paper glue them down to the sheet metal, then cut out of t…
2 Likes
KX9M
November 25, 2022, 1:48pm
114
Even though I’m not much of a sheet metal guy or Fusion guy… It’s that “Feed Your Head” thing that gets me… LOL
You never know what you might learn!! Thanks for the stream…
2 Likes
@KX9M
Here are the pictures.
If I was making more of them I would slightly adjust the measurements but turned out pretty good.
I would have won the race if I was laying it out and cutting it out by hand for a one off vs the CNC. Anything more than one it would have beat me.
20 gauge stainless 300 in per minute 25 amps fine cut consumables
3 Likes
KX9M
November 25, 2022, 9:50pm
116
@TinWhisperer Not bad at all…!! Looks like it came out as planned…
Super good to spend a little time this morning…!!
1 Like
Are these videos available anywhere else? Only a few of them are playing for me
@walton34 I have some available on YouTube.
They’re only available for 7 Days on twitch I do have them all saved my computer though.
The streams aren’t very polished so I usually only post them if someone requests a specific episode to get posted to YouTube.
[tinwhisperer v1 youtube 16 9]
Moved some content over to YouTube today from my twitch and loom pages.
Check it out and please enjoy the videos
If you have a specific video request please post below or send me a message.
Or if there is a twitch video you want transferred to YouTube also let me know.
I’m getting ready to do another live stream this morning at about 4:00 -4:10a.m. mountain standard Time today.
1 Like
stream today about this forum topic
Im very new to fusion and the plasma table world. Ive got the XR and have cut some simple things and am ready to move on too more complex signs. My biggest problem is trying to select the contours in the manufacturing tab. Ive researched around and tried to find the “sketch check” add on but autodesk says it cannot find it. Does anyone have any ideas or better methods of fixing the multiple contour segments?
1 Like
KX9M
November 27, 2022, 3:58pm
120
Watched the stream but, wasn’t up in time for LIVE… LOL
So, it was a couple of broken corners and such… Nice work!!
1 Like
Starting a live stream at 4 am mst
it on this topic
I just started an account 12 days ago
[tinwhisperer v1 youtube 16 9]
Moved some content over to YouTube today from my twitch and loom pages.
Check it out and please enjoy the videos
If you have a specific video request please post below or send me a message.
Or if there is a twitch video you want transferred to YouTube also let me know.
I’m hoping to figure out how to tandem stream through my broadcasting software so I can stream both on YouTube and twitch at the same time.
If there’s any topic above that you’d like seen moved over to YouTube let me know I have them all saved to my computer.
I normally live stream quite early in the morning when I do live stream.
I was thinking about doing a scheduled live stream in the future about monograms.
1 Like
jamesdhatch:
Are you using OBS?
Yes I’m using obs.
Apparently in August YouTube lifted the band on dual streaming from twitch…
1 Like
Stream 5:45 am mst
Streaming Langmuir forum questions.
Talking about templating in Fusion 360 CAM
Topics Discussed
I still consider myself an amateur.
Just implying that I don’t talk about it or cover it that much, 99% of what I do is basic workflow concepts.
But it looks like it’s time to make a few intermediate videos.
I’ll work through it on the live stream a few times and then put together a Polished video to post on YouTube.
I talk about templating in fusion 360 cam.
If @langmuir-aksel could please add the
*.f3dhsm-template
file extension to the “allowed” uploads the we can start experimenting…
and at 28 mintues
What’s the best way to get the details out of a file I purchased. I’m trying to figure out how to get details out of a train file I purchased. I’m really am not trying to get everyone to do the work for me, as I’m trying to learn…and I’ve gotten a little better after watching @TinWhisperer but seems like the more detailed I get the harder it definitely gets…even tried scaling this file up bigger thinking it would help…but still losing lots of details. If it helps I’m using a Primeweld Cut60 with…
1 Like
Beginning a live stream.
Topics
-Group Editable flow charts for Forum troubleshooting Support.
-Forum Fusion 360 CAD Questions
https://lucid.app/lucidchart/adbad011-8893-4240-aa55-ec62d111762f/edit?viewport_loc=-181%2C-147%2C2219%2C1268%2C0_0&invitationId=inv_0ee266fc-26dc-402e-814f-e2efb59d491f
Here is a link to a document we can start trying this process on. I think this maybe very helpful for common forum issues
here is a example
6:30 am mst
2 Likes
Knick
December 3, 2022, 1:43pm
128
I think that is a great idea.
But how do you keep them from becoming out of control?
Seems like someone would need to be in control and at some point lock them so they cant be messed with?
Do you keep them to the basics and if it goes beyond that they would ask for help in the forum?
I really like the idea I’m just afraid they might get out of control or maybe they cant (I’m thinking forum threads)
So how would people find them? would there be a link in the forum?
1 Like
Starting a live stream 9:25am mst
New 21:9 monitor!. Getting few file ready to cut today for stock.
New View !
21:9 center monitor. Getting few files ready to cut today for stock.
revamped my computer setup now I am thinking of cable management.
1 Like
Wsidr1
December 4, 2022, 9:07pm
130
This is screenshot of my view with the new aspect ratio. It’s too small to read anything. My screen res is 1366 x 768.
Maybe someone else can let you know their condition.
1 Like
I was wondering if it might be too small.
I can stream it from one of my other lower resolution monitors.
I want to make sure the information stays accessible.
1 Like
rtvliet
December 5, 2022, 1:10am
132
T W file cut at 50% 18 ga
2 Likes