Torch Stops Firing/ Mach skips steps entirely/ Mach 3 freezes

[BrooklynBravest]

I believe I have resolved the issue.

I made a small writeup here.

FYI: Razerweld Hypertherm Torch

Recently I posted in the Mach3 software section regarding issues with cuts being interrupted due to no arc firing. For those unaware/considering future purchase Razerweld offers a Hypertherm “Style” torch upgrade to their plasma units. This torch is compatible with hypertherm consumables however Razerweld produces their own clone consumables. The issue with the torch is it comes only with a hypertherm style “drag” deflector. This drag tip actually adds around 1/16-3/32" spacing from the nozzle…