(Solved) XR: Machine disconnected alert in fire control

No need for you to delete anything.

We usually add solved to the title to help people searching the forum in the future.

Where you weren’t the OP you aren’t likely able to do either of those things Toolboy was asking… and we have no idea what Machine the OP was using or if he ever solved his issue.

Thanks for asking your questions and thanks for reporting back what you did to solve the issue. It will likely help allot of people in the future.

4 Likes

So using the other USB port solved your problem for this and the other topic?

Well honestly, believe it solves my issues.

My advice or a recap would be.

  • Good certified USB A to USB B cable
  • Chokes at both ends (machine side & mini_pc side)
  • Use the USB port on the mini_pc that’s furthest from the mini_pc power connection
  • Uncoil your plasma ground lead ( for good measure )
  • Route THC leads away from torch cable ( for good measure )

All of these seem to be producing great outcomes.

I’ve got enough material for 6 more of these. That means everyone in the group is covered :wink:

Now off to figure out how to get the torch dead square to every so I can get straighter side on thick stuff.

Cheers!

2 Likes