SheetCam post processor

which post processor is everyone using in SheetCam ?

mach 3 plasma is the post processor

There are a couple of posts here for custom Sheetcam post-processors you can use - they’re set to address Sheetcam working in seconds (internally even if you use milliseconds in the UI) while Mach 3 only deals with sub-seconds when expressed as milliseconds (bug in Mach 3 that treats half-second delays or pauses as 1 second).

If you use the Mach 3 Plasma with the Crossfire or Crossfire XL, use the one labeled “no Z” so you don’t have a bunch of height control stuff in the tap file that the Crossfire can’t use.

1 Like