LS-THC issue - torch turns off - Help me recover job

[ScottHen]

Hoping to be able to save this job and piece of metal, especially with the price of steel.

All has been going well with my Crossfire but all of a sudden on this job the torch keeps shutting off and I get the THC error. It happen a couple of time, but was able to keep going each time when I selected retry cut. Now that I am in the “S” of my design it keeps giving me the error.

Any ideas of what can be going on and what I can do to salvage my $100 piece of steel.

Thanks,

Scott

[ScottHen]

Quick update. I was not able to ID what the problem was but I was able to figure out how to start the job from a specific line and complete the cut which turned out pretty good. That said, no metal was scrapped during this job which is awesome.

[TinWhisperer]

FireControl Continue mid Code

Here is an example with screen shots. [line%20loop%201%20] [line%20loop%202%20] in this example it stops cutting for some reason. you repair the problem and need to pickup where it stopped cutting. here that is the top right of the W. We select that area and are given 2 options below as it jumps to that line of code. (Line 1494 in this case) [line%20loop%203%20] SELECTING LOOP will load a new program from the last pierce. [line%20loop%204%20] [line%20loop%205%20%20] SELECTING LINE wi…

It was going to link this earlier but I had my hands full. Great you got it figured